Summary

Be able to drop twice How to use the drop device?

1. Power on. Power on the airdrop kit and the LED Indicator will light on. Power off and the LED Indicator light will off.
2. Set the DJI GO APP. Turn off the arm light (C1/C2) to check if the airdrop kit can work normally.
3. Tie the stuffs which need to be parachuted on the drones and install the light sensor module, the servo gear will be locked automatically.
If the lock are not in place, please press the buttons on the airdrop
kit to adjust the places. Installation done.
4. Tie the stuffs which need to be parachuted on the drones and install the light sensor module, the servo gear will be locked automatically.
If the lock are not in place, please press the buttons on the airdrop
kit to adjust the places. Installation done.
5. Do the parachute. Fly to the places you want to airdrop,
turn on the arm light by the remote controller and the airdrop kit will open the lock, airdrop done.

• The airdrop kit will ran out of battery soon if the LED Indicator flashed (4 times/second). The LED Indictor will turned on during the charging and off when the charging done. (Current:500mA)
• The light sensor modules will be in different shapes as the drones are different. 3. Please checking to see if the cables blocked the props/sensors or DJI GO APP has unusual reminders after the installation.
• Please checking to see if the cables blocked the props/sensors or DJI GO APP has unusual reminders after the installation.
• Please don't tie much stuffs on the drones as different drones can burden different weights. If you want to add more weights, please test the weights gradually and keep the fly safe.
• Please follow the local laws during the flight, the operator will have the full responsibility for the safety and accident cases.

Details

Package weight: 0.55kg

• Color: Black
• Weight: 122g
• Package Dimension: 12*5*12cm
• Payload: Less than 500g
• With built-in 400mAh Lipo battery
• Charging time: About 70 minutes
• For DJI Mavic 2